top of page
parts for sale
BDS Polished Competition Blower 8-71
Fresh and ready to go built by Kenny at Superpower Unlimited.
New bearings, gears, seals, teflon
Stage 4 (hard anodised rotors, inside case and bearing plate surfaces)
440790741_1106865377070341_8038198903236116132_n.jpg
BBC Headers
2.25" diameter
Used but perfectly useable
BBC bolt pattern
£275.
Used but perfectly useable
BBC bolt pattern
£275.
SFI 10.2 chrome moly chassis built by SPITZER Race cars
125" wheelbase.
Built by Spitzer race cars USA (1997) - we imported in 2007.
Spitzer fabricated axle case.
Cast iron 3rd member - 4:11 gears 35 spline shafts and spool
Chris Issacs - Chrome moly prop guard.
Strange Rear disc brakes and master cylinder.
Braided brake lines.
New aluminium puke tank (with vent)
New aluminium fuel tank (4 x an8 male)
BBC motor plate
Flywheel shield
Blow back bars and tabs
Chrome moly single wheel wheelie bar
Rear light
Brand new FK Rod Ends rose joints throughout
Chute lever
Fuel shutoff lever
Butterfly steering wheel
Wheels all good. Etched and painted black
All side panels carbon wrapped
Full Belly pan
DJ safety fire bottles and system plumbed
Front and rear wings with carbon fibre spill plates
Bantam altered body only weighs 20lbs
Loads I am probably forgetting… please ask questions.
SELLING EVERYTHING, WILL SPLIT - ASK.
Built by Spitzer race cars USA (1997) - we imported in 2007.
Spitzer fabricated axle case.
Cast iron 3rd member - 4:11 gears 35 spline shafts and spool
Chris Issacs - Chrome moly prop guard.
Strange Rear disc brakes and master cylinder.
Braided brake lines.
New aluminium puke tank (with vent)
New aluminium fuel tank (4 x an8 male)
BBC motor plate
Flywheel shield
Blow back bars and tabs
Chrome moly single wheel wheelie bar
Rear light
Brand new FK Rod Ends rose joints throughout
Chute lever
Fuel shutoff lever
Butterfly steering wheel
Wheels all good. Etched and painted black
All side panels carbon wrapped
Full Belly pan
DJ safety fire bottles and system plumbed
Front and rear wings with carbon fibre spill plates
Bantam altered body only weighs 20lbs
Loads I am probably forgetting… please ask questions.
SELLING EVERYTHING, WILL SPLIT - ASK.
T&D BBC Shaft Rocker Arm Kit - 1.7/1.7 Ratio
T& D BBC Shaft Rocker Arm Kit - 1.7/1.7 Ratio
I bought them to fit Brodix bb3 heads.
I will confirm part numbers etc asap.
Posting to gauge interest.
I bought them to fit Brodix bb3 heads.
I will confirm part numbers etc asap.
Posting to gauge interest.
New century Fabricated Billet Rail Valve Covers
Two sets of these available.
New century Fabricated Billet Rail Valve Covers with Valve Spring Oilers
£400 a set.
New century Fabricated Billet Rail Valve Covers with Valve Spring Oilers
£400 a set.
12ft Diest chute
12ft chute, Blue As Shown. With pilot spring and Black Bag.
£350.
£350.
Geradot upright injector
Standard length opening.
13.25" bolt centre
5.25" butterflies
Square metering valve
All lines and nozzles
Throttle shaft, levers and stops.
£1000
13.25" bolt centre
5.25" butterflies
Square metering valve
All lines and nozzles
Throttle shaft, levers and stops.
£1000
Moroso 20385 Drag Race Oil Pan.
Excellent condition - never DAMAGED
https://www.moroso.com/chevrolet-big-block20385/
Oil Pan, Aluminum, Natural, 6 qt., Stroker Clearanced, Chevy, Big Block.
NPT fitting attachment. Accepts 4.75 in. stroke with aluminum rods. Fits 4 bolt main caps including front and rear.
£500.
https://www.moroso.com/chevrolet-big-block20385/
Oil Pan, Aluminum, Natural, 6 qt., Stroker Clearanced, Chevy, Big Block.
NPT fitting attachment. Accepts 4.75 in. stroke with aluminum rods. Fits 4 bolt main caps including front and rear.
£500.
Billet Morgan BBC cylinder heads
Billet Morgan BBC cylinder heads.
Port matched Miersch manifold.
Billet 6061 set back plate.
Used – like new
Billet aluminium by Morgan.
6061-T6 material
Relocated valve center lines (2.375” IN 1.875” EX)
Relocated spark plugs
5 bolt header flange
34lbs each
£4,500.
Port matched Miersch manifold.
Billet 6061 set back plate.
Used – like new
Billet aluminium by Morgan.
6061-T6 material
Relocated valve center lines (2.375” IN 1.875” EX)
Relocated spark plugs
5 bolt header flange
34lbs each
£4,500.
Kobelco K11 hi helix supercharger
Kobelco K11 hi helix supercharger, DMPE spacer and custom injector.
Extensive mods by Les Davenport.
We made consistant boost at 15% OD.
We made the injector as rules of NFAA didn't permit carbon.
Aiming to sell this as it sits, the blower, space, restraint plate, injector, snout.
Buy and bolt on.
£4,500.
Extensive mods by Les Davenport.
We made consistant boost at 15% OD.
We made the injector as rules of NFAA didn't permit carbon.
Aiming to sell this as it sits, the blower, space, restraint plate, injector, snout.
Buy and bolt on.
£4,500.
BBC Headers
2.25" diameter
5 x bolt pattern
£500.
5 x bolt pattern
£500.
MSD Ignition 7730 Power Grid Ignition System Controller
This was bought to add to existing setup. Only ever mocked, never used in anger.
£700.
£700.
MSD 44 #8130 CW Pro Cap W/Coil & Points Box
MSD 44 #8130 CW Pro Cap W/Coil & Points Box
£3,000
£3,000
Trick Titanium 6.3 SFI Bell Housing
It is 8.125" deep, equipped with a cross shaft assembly, throw-out bearing, candlestick, liner and covers for adjustment.
Brand new candlestick and collar assembly including spring and bearing.
Note: both Chevy and Hemi bolt patterns. Certified by Robinson Race Cars (who we bought from).
£2,500 firm.
Brand new candlestick and collar assembly including spring and bearing.
Note: both Chevy and Hemi bolt patterns. Certified by Robinson Race Cars (who we bought from).
£2,500 firm.
Strange aluminium ultra 3rd member Center Section
Strange aluminium ultra 3rd member Center Section, Aluminum Ultra, Ford, 9 in., Assembled, 40 Spline Spool. 9.5” pro gears.
I will sort a better photo…
I will sort a better photo…
PAIR OF WELD ALUMA STAR DOUBLE BEADLOCK WHEELS
PAIR OF WELD ALUMA STAR DOUBLE BEADLOCK WHEELS, POLISHED, POLISHED CNTRS, GOLD DBL, 16X16, 5X4.75
£1,800.
£1,800.
Avondale Composites '32 Fiat Topolino - tined, twin chute mounts, windows, painted (Google 'Bennett Racing topolino') - £1000
Avondale Composites '32 Fiat Topolino - tined, twin chute mounts, windows, painted (Google 'Bennett Racing topolino') - £1000
Body For sale
Body For sale. £750.
Note: we chopped at bulkhead but we kept nose piece too.
Note: we chopped at bulkhead but we kept nose piece too.
PAIR OF WELD ALUMASTAR 2.0 POLISHED FRONT RUNNER WHEELS
PAIR OF WELD ALUMASTAR 2.0 POLISHED FRONT RUNNER WHEELS 15"X 3.5", 1.75" BS
WITH GOODYEAR TYRES, complete with bearings and caps.
£1000 firm.
WITH GOODYEAR TYRES, complete with bearings and caps.
£1000 firm.
2 x Deist chutes for sale
2 x Deist chutes for sale. Both red. With bags, pilot springs.
£750 for the pair. Firm.
£750 for the pair. Firm.
RCD blower starter
RCD blower starter for sale.
Perfect working order.
£2,750.
Perfect working order.
£2,750.
Taylor Motorsports blower bag.
174cm total length. No longer required.
View product on here - https://www.taylormotorsports.com
£125
View product on here - https://www.taylormotorsports.com
£125
Low profile PSI injector
Low profile PSI injector that is made of cast magnesium, is very lightweight, O-ringed.
This injector is low profile and ideal for cars where vision is an issue.
With this design of a hat it is 3.750" tall and works well on a roots blower with an injector adpt. The injector assm. includes a injector housing, throttle shaft, throttle stops and butterflies.
The injector weights eight pounds.
Suit a dragster, altered, funny car, or pro mod. Two air holes can be seen next to the center mounting bolt towards the front of the injector. Fits B, C, D or H PSI screw blowers.
£1000.
This injector is low profile and ideal for cars where vision is an issue.
With this design of a hat it is 3.750" tall and works well on a roots blower with an injector adpt. The injector assm. includes a injector housing, throttle shaft, throttle stops and butterflies.
The injector weights eight pounds.
Suit a dragster, altered, funny car, or pro mod. Two air holes can be seen next to the center mounting bolt towards the front of the injector. Fits B, C, D or H PSI screw blowers.
£1000.
Brand new IMPACT Drag Champ helmet
With SFi helmet sock
With front restraint
Size is medium
Clear & orange visor
Brand new, never used
£350 firm.
With front restraint
Size is medium
Clear & orange visor
Brand new, never used
£350 firm.
SOLD
SOLD
SOLD
SOLD
bottom of page